| 简历： 范垂钢，男，1977年6月生。工学博士，副研究员。1999年7月于华北理工大学（原河北理工学院）获金属矿分选工学学士学位；2004年7月于中国矿业大学（北京）获煤炭分选工学硕士学位，研究方向为水煤浆流变学特性；2008年12月于中国科学院过程工程研究所获化学工程专业工学博士学位，研究方向为反应器传递与反应；2009年3月起在加拿大英属哥伦比亚大学做博士后研究，主要研究方向为流态化技术与脱硝技术。2011年5月回到中国科学院过程工程研究所工作。主要从事能源化工和流态化方面的研究工作。在国际主流学术期刊发表SCI论文多篇，国内学术期刊发表论文多篇，曾先后参加过国家“863”、“973”等计划项目、国家自然基金项目、中国科学院知识创新工程技术研究和中科院科技先导项目，并承担多项企业合作课题。 代表论著：
1. Influence of additives on CaCO3 precursors and multicycle CO2 capture performance of CaO sorbents, Journal of Environmental Chemical Engineering (2022) Corresponding author
2. Biomass ash induced agglomeration in fluidized bed. Part 2: Effect of potassium salts in different gas composition, Fuel Processing Technology (2018) 2nd author
3. Density Functional Theory Study of the Role of an Carbon–Oxygen Single Bond Group in the NO–Char Reaction Energy & Fuels (2018) Corresponding author
4. Effect of surface carbon-oxygen complexes during NO reduction by coal char. Fuel (2017) 3rd author
5. Characterization of transverse mixing in a screw mixer by image analysis. Drying technology (2016) 3rd author
6. Multifluid Modeling of Coal Pyrolysis in a Downer Reactor. Industrial & engineering chemistry research (2016) 2nd author
Fusion Characterization of Biomass Ash. Thermochimica Acta (2016) 2nd author
7. Biomass-Ash-Induced Agglomeration in a Fluidized Bed. Part 1: 2 Experimental Study on the Effects of a Gas Atmosphere. Energy & fuels (2016) 2nd author
8. Residence Time Distribution of Particles in a Screw Feeder: Experimental and Modelling Study. Canadian journal of chemical engineering (2015) 2nd author
9. Pyrolysis-Bridged Hybrid Power Systems and Their Application for Thermal Power Plants Energy & fuels (2014). 2nd author
10. Multifluid Modeling of Mixing and Segregation of Binary Gas-Solid Flow in a Downer Reactor for Coal. Pyrolysis Industrial & engineering chemistry research (2014) 3rd author
11. Development of off-gas emission kinetics for stored wood pellets. The Annals of Occupational Hygiene (2013). 1st author
12. Grid zone performance of a fluidized bed through analysis of local solids holdup signals. Powder Technology (2012) 1st author | 
